Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vPam1-0000SBC; Mon, 18 Nov 96 14:58 CST |
Encoding: |
42 Text |
Old-Return-Path: |
|
Date: |
Mon, 18 Nov 96 15:05:30 cst |
Precedence: |
list |
Resent-From: |
|
Cc: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"vtJgb1.0.JCA.utCao"@ipc> |
From [log in to unmask] Tue Nov 19 09: |
21:20 1996 |
From: |
|
X-Loop: |
|
Subject: |
|
Resent-Sender: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Hi Pat-
You don't need a special solder but rather a better flux. Nickel oxide
is very tough to solder because of the nature of the oxide itself
(very dense, coherent, etc.). You need to investigate using a more
active flux that can breakup the oxide. Warning -the more active the
flux, the more problems with corrosion. Work with your flux supplier
and find something a bit stronger than you are using now.
Dave Hillman
Rockwell Collins
[log in to unmask]
______________________________ Reply Separator _________________________________
Subject: ASSY: SMT Soldering to Nickle pads
Author: [log in to unmask] at ccmgw1
Date: 11/18/96 2:56 PM
Hello All:
Can anyone tell me about soldering SMT parts to Nickle plated copper pads.
Is there a special solder alloy that I should use?
-Pat-
-------------
Patrick McGuine
Nicolet Instrument
[log in to unmask]
(608) 276-6334
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|