Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vOYuW-0000RYC; Fri, 15 Nov 96 18:47 CST |
Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
Old-Return-Path: |
|
Date: |
Fri, 15 Nov 1996 19:54:53 -0500 (EST) |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"WvmP02.0.hYL.7yGZo"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Mon Nov 18 10: |
40:40 1996 |
X-Loop: |
|
Mime-Version: |
1.0 |
Message-Id: |
|
Parts/Attachments: |
|
|
Hi Dave: We are installing SMD's on an FR-4 palletized scored array.
It is 6-up, each 1.0" wide by 11.5" in length. Material Thickness is
.042" and I specified scoring depth to leave .015" material. Have been
doing approx. 500 assemblies every 7 weeks for approx. 2.5 years. Found
the trick to scoring is depth and parallelism of top and bottom V-cuts.
Hope this helps!
Bill Black
Medco
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|