 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vLZvX-0000SkC; Thu, 7 Nov 96 13:15 CST |
| Old-Return-Path: |
|
| Date: |
Thu, 07 Nov 96 14:19:15 EST |
| Precedence: |
list |
| Resent-From: |
|
| From [log in to unmask] Thu Nov 7 13: |
49:01 1996 |
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Resent-Message-ID: |
<"mqmHj.0.lA7.YLZWo"@ipc> |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
Some questions about your process on the 50 mil connector
soldering question.
1. What type machine do you have?
2. What is the direction of flow of the connector across
your wave solder machine? example: End first or side first.
3. Does one end of the 50 mil connector have a solder thief
to draw the solder away from the last two pins as the
connector leaves the solder wave?
4. Do you use any type of mask between the pins of the
connector to minimize or eliminate bridging.
5. Have you tried paste in hole?
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
