Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vGdVe-0000QoC; Thu, 24 Oct 96 23:04 CDT |
Old-Return-Path: |
|
Date: |
25 Oct 96 09:23 GMT+0500 |
Ua-Content-Id: |
QHD3420 36 |
Precedence: |
list |
Resent-From: |
|
From [log in to unmask] Mon Oct 28 08: |
49:47 1996 |
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
Priority: |
normal |
X400-Trace: |
IN*VSNL*SPRINTRPG; Arrival 25 Oct 96 09:23 GMT+0500
Action: Relayed
in*vsnl*; Arrival 25 Oct 96 09:26 CDT
Action: Relayed |
Original-Encoded-Information-Types: |
IA5-Text |
X-Loop: |
|
P1-Message-Id: |
IN*VSNL*SPRINTRPG;MJJG-2521-8788/36 |
Resent-Message-ID: |
<"Hzag03.0.dwG.Kn3So"@ipc> |
Subject: |
|
From: |
|
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Message-Id: |
|
Parts/Attachments: |
|
|
Date : 24/10/96 12:51
Msg From: S MAITRA
Dear Technetters,
We are looking for following clarifications and would appreciate if
someone can reply on this:
1) Under section soldering clause no. 4.2.1 (exposed basis metal) of
IPC-A-610B clarify the non conforming defect for class 1,2,3
a) Is copper exposed to be treated as a defect if on EMI pad?
b) Is copper exposed to be treated as a defect if on Mounting hole
(explain for top and bottom side both)?
c) Is copper exposed also to be treated as a defect if any where
on the board except traces?
2) Under section IPC-A-600D section 11.6 Solder Mask Cracking and
Scratches for acceptable condition class 1,2 & 3.
Please clarify conductive pattern in reference to exposed copper.
In other words as per our understandings IPC-A-610B does not allow
any copper exposed on assembled boards on either of the sides. Does
this neccesarily mean that under IPC-A-600D also no copper exposed is
allowed on either side of the board ? Is a pin point Copper exposed
also a reject on assembled board and under what magnification and
lumminance should this be inspected?
We will really appreciate your quick response on this.
S. MAITRA
Deputy General Manager - QA
ALtos India Ltd.
Fax :91-124-340842/91-124-340892/91-11-6488591
Phone :91-124-340867/340868/340872
E-Mail:[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|