Mime-Version: |
1.0 |
Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
Old-Return-Path: |
|
Date: |
Wed, 14 Feb 1996 07:56:01 -0500 (EST) |
Precedence: |
list |
Resent-From: |
|
Cc: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
|
Resent-Sender: |
|
From [log in to unmask] Wed Feb 14 11: |
57:43 1996 |
Resent-Message-ID: |
<"ceUK1.0.qJB.uwT8n"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
In-Reply-To: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0tmgwK-00005HC; Wed, 14 Feb 96 07:08 CST |
Message-Id: |
<Pine.SUN.3.91.960214075302.18894A-100000@automata> |
Parts/Attachments: |
|
|
It's quite common to see growths in developer rinses which are mildly
alkaline and contain organics or in finishing rinses like CU-56 but I've
not seen it in acid plating rinses. The best approach I've seen is to add
a strong hypochlorite bleach to the tank once a month to kill the
bacteria and then rinse thoroughly and refill.
---------------------------------------------
While cruising the Internet, be sure to visit
our home page at http://www.automata.com
---------------------------------------------
On Tue, 13 Feb 1996, dhoppe wrote:
> Has anyone had any exposure to fungal growths in thier plating line
> rinse tanks (especially after the acid cleaner). This hyphae is quite
> hearty and nothing seems to kill it. It is not an algae. I've even
> tried glutaraldehyde, a common antifoulant used in the metal finishing
> industry, to no avail. What does anybody say?
>
> Don Hoppe Jr.
> ZYCON
> [log in to unmask]
>
>
|
|
|