 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset=us-ascii |
| From [log in to unmask] Thu Oct 17 12: |
04:12 1996 |
| Date: |
Thu, 17 Oct 1996 18:27:59 +0800 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| Content-Transfer-Encoding: |
7bit |
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| X-Loop: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vDq3X-0000S9C; Thu, 17 Oct 96 05:52 CDT |
| Resent-Message-ID: |
<"mdFWw2.0.RVC.8_WPo"@ipc> |
| Subject: |
|
| From: |
es500yap@pts7 ( YAP CHOW LAN) |
| Old-Return-Path: |
<es500yap@pts7> |
| Cc: |
es500yap@pts7 |
| Content-MD5: |
tVUBPi5aRbDS5VVjPwvCQA== |
| Message-Id: |
|
| Parts/Attachments: |
|
|
Hi,
Would like to know if there is any recommendation on printing solder paste onto
exposed solder pads which the solder mask over bare copper is 3 mils higher than
the exposed solder pads? Recently, we are attempting to print so but result in
solder shorts due to extra heights.
Appreciate any helpful info.
thanks
stella yap
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
