 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vDaTt-0000RdC; Wed, 16 Oct 96 13:14 CDT |
| X-VMS-To: |
|
| Date: |
Wed, 16 Oct 1996 12:51:06 -0500 (EST) |
| MIME-version: |
1.0 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Loop: |
|
| Resent-Message-ID: |
<"-2jCD1.0.4aI.qNIPo"@ipc> |
| Old-Return-Path: |
|
| Content-type: |
TEXT/PLAIN; CHARSET=US-ASCII |
| Subject: |
|
| Message-id: |
|
| From [log in to unmask] Wed Oct 16 14: |
41:39 1996 |
| Content-transfer-encoding: |
7BIT |
| X-VMS-Cc: |
OLAFSSON |
| From: |
|
| Parts/Attachments: |
|
|
Do any of you know of or have a checklist (at a high level) of what should
be investigated if solder balls left on PCB assemblies after reflow? What
is typically the most common cause that should be investigated first?
Thanks,
Tom Olafsson
Teradyne Inc.
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
