Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vBSjd-0000RMC; Thu, 10 Oct 96 16:33 CDT |
Old-Return-Path: |
|
Date: |
Thu, 10 Oct 96 13:21:05 PST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"CHvxZ2.0.aiF.qkMNo"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Thu Oct 10 16: |
35:47 1996 |
X-Loop: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
We just installed the Resys system into our facility. For the most
part it is working well. I had a few problems with it blowing fuses. I
also noticed that the heating element gets hotter than the set point
when no water is flowing through it. I have had to turn the heater off
every time I shut down the machine. Hope this helps good luck.
Steven E. Luther
Engineering Manager
Zycon Corporation
Backplane Division
408-556-8045
______________________________ Reply Separator _________________________________
Subject: Re: small closed loop aqueous recovery system
Author: [log in to unmask] at corp
Date: 10/8/96 1:39 PM
--0__=hN6OFceGcsDgKpkrm6i5P3ypuslJgmik41y7frdtVItB6WBTNYNoMDnz
Content-type: text/plain; charset=us-ascii
We are moving into a new facility and have just installed a new in-line
cleaner along with the Resys CLS system there. The PWA line will be
moving to the new building this weekend. If everything goes well, it
should all be on-line next week. So far, the Resys looks ok. If I can
give you any additional info, you may contact me at:
Charles Barker, Manufacturing Engineer
Input/Output, Inc.
12200 Parc Crest Drive
Stafford, Texas 77477-2409
281/552-3328
[log in to unmask]
To: technet @ ipc.org
cc: (bcc: Charles Barker/IO-US)
From: TechNet @ ipc.org
Date: 10/08/96 11:45:11 AM MST
Subject: small closed loop aqueous recovery system
--0__=hN6OFceGcsDgKpkrm6i5P3ypuslJgmik41y7frdtVItB6WBTNYNoMDnz
Does anyone have any experience with Resys's aqueous recovery system? I
am looking at adding water recovery capability to our in-line cleaners
and am wondering what kinds of issues/problems other companies have
faced.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
--0__=hN6OFceGcsDgKpkrm6i5P3ypuslJgmik41y7frdtVItB6WBTNYNoMDnz--
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|