Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
<simon.ipc.org!nicmad.nicolet.com!nicmad.nicolet.com!mcguine> |
Date: |
Thu, 10 Oct 1996 11:02:15 -0500 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vBO4D-0000RMC; Thu, 10 Oct 96 11:34 CDT |
From [log in to unmask] Thu Oct 10 14: |
47:57 1996 |
Subject: |
|
From: |
|
Resent-Message-ID: |
<"IEDY2.0.1wI.OLINo"@ipc> |
Cc: |
|
X-Mailer: |
Windows Eudora Pro Version 2.2 (16) |
Message-Id: |
|
Parts/Attachments: |
|
|
I'm not familiar w/ how Gemini brings the needle down to get a consistent
z-height above the board. It has been my experience however that it is
extraordinarily important that this is consistent. I have an older Camalot,
we had to purchase a z-axis compensator for it from Camalot. Also, does the
Gemini use a positive displacement pump? I have also found that this helped
a lot. We just switched from Loctite 348 to Loctite 3609. 3609 is much
better for us.
At 09:24 10/10/96 CDT, Paul Stolar wrote:
> I am using a Camalot Gemini and I wonder if anyone out there has
> experimented with how to reduce variation. I would prefer that Camalot
> and Loctite not respond to this, I would like to hear from people in
> the field. If you prefer, write to me off line. I will compile the
> inputs w/o names and repost.
>
> Thanks,
>
> Paul Stolar
> [log in to unmask]
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To unsubscribe from this list at any time, send a message to: *
>* [log in to unmask] with <subject: unsubscribe> and no text. *
>***************************************************************************
>
>
>
-Pat-
-------------
Patrick McGuine
Nicolet Instrument
[log in to unmask]
(608) 276-6334
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|