 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vBO11-0000TtC; Thu, 10 Oct 96 11:31 CDT |
| Encoding: |
51 Text |
| Old-Return-Path: |
|
| Date: |
Thu, 10 Oct 96 11:16:35 CDT |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| From [log in to unmask] Thu Oct 10 14: |
47:39 1996 |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| Cc: |
|
| Resent-Message-ID: |
<"HkVVo1.0.rRK.LJINo"@ipc> |
| Message-Id: |
|
| Parts/Attachments: |
|
|
The Gemini does use a positive displacement pump. We are also using
3609.
______________________________ Reply Separator _________________________________
Subject: Re: Glue
Author: Pat McGuine <[log in to unmask]> at Internet
Date: 10/10/96 11:16 AM
I'm not familiar w/ how Gemini brings the needle down to get a consistent
z-height above the board. It has been my experience however that it is
extraordinarily important that this is consistent. I have an older Camalot,
we had to purchase a z-axis compensator for it from Camalot. Also, does the
Gemini use a positive displacement pump? I have also found that this helped
a lot. We just switched from Loctite 348 to Loctite 3609. 3609 is much
better for us.
At 09:24 10/10/96 CDT, Paul Stolar wrote:
> I am using a Camalot Gemini and I wonder if anyone out there has
> experimented with how to reduce variation. I would prefer that Camalot
> and Loctite not respond to this, I would like to hear from people in
> the field. If you prefer, write to me off line. I will compile the
> inputs w/o names and repost.
>
> Thanks,
>
> Paul Stolar
> [log in to unmask]
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To unsubscribe from this list at any time, send a message to: *
>* [log in to unmask] with <subject: unsubscribe> and no text. *
>***************************************************************************
>
>
>
-Pat-
-------------
Patrick McGuine
Nicolet Instrument
[log in to unmask]
(608) 276-6334
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
