 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| Old-Return-Path: |
|
| Date: |
Tue, 1 Oct 1996 09:53:29 -0500 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| X-Sender: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Loop: |
|
| Resent-Message-ID: |
<"cCMB01.0.nIC.BvIKo"@ipc> |
| Subject: |
|
| From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v863g-0000TSC; Tue, 1 Oct 96 09:44 CDT |
| From [log in to unmask] Tue Oct 1 16: |
54:33 1996 |
| Cc: |
|
| Message-Id: |
<v02130500ae76df184a6c@[157.175.110.24]> |
| Parts/Attachments: |
|
|
Bill Kasprzak said:
>We are currently working a job that uses NASA spec NHB5300.4(3A-2) as a
>guide for Requirements for Soldered Electrical Connections.
>Does anyone have any tricks for supporting the body of CK06 style leaded
>components which are mounted radially that needs to be supported approx.
>.060" up off the board ??? The "S" level component is not available with
>the "V" standoff on the body.
There are little glass beads made for this purpose.
You put the tiny devils on the leads, then install in the holes. I think
one source is:
Bivar, Inc.,
4 Thomas, Irvine, CA, 92718, USA
TEL: 714-951-8808; FAX: 714-951-3974
good luck,
Jerry Cupples
Interphase Corporation
Dallas, TX USA
http://www.iphase.com
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
