Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v7pMO-0000YQC; Mon, 30 Sep 96 15:54 CDT |
From [log in to unmask] Mon Sep 30 16: |
04:06 1996 |
Old-Return-Path: |
|
Date: |
Mon, 30 Sep 96 13:57:44 PST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"BQ10d3.0.xr5.FE3Ko"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Does anyone have experience soldering gold-plated SMT components to
gold-plated PCB's using a eutectic (Sn63/Pb37) solder? The solder
joints exhibit a dull, grainy appearance. Although I know that longer
liquidus dwell times and a maximum reflow temperature of 220 C are
typically recommended when soldering to gold, will other solder
alloys perform better (i.e,, Indium alloys)?
Thanks in advance,
Greg Kilinski
Acuson Corp.
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|