Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v6da8-0000ZqC; Fri, 27 Sep 96 09:07 CDT |
Encoding: |
21 TEXT |
Old-Return-Path: |
|
Date: |
Fri, 27 Sep 96 10:16:00 PDT |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
From [log in to unmask] Fri Sep 27 14: |
26:08 1996 |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"nPQ0z1.0.bcK.u-zIo"@ipc> |
Subject: |
|
From: |
|
X-Status: |
|
X-Loop: |
|
X-Mailer: |
Microsoft Mail V3.0 |
Message-Id: |
|
Parts/Attachments: |
|
|
We are in the process of trying to comply with the provisions of J-Std-001A,
Appendix D-4.1, which basically states that level 2 testing (SIR test, Ionic
Contamination, and visual inspection) needs to be done to qualify your
process for the use of water soluble fluxes. I have the IPC-B-36 Circuit
boards and the 68 Pin LLC's needed to run the test. I was quite surprised to
see that my IPC-B-36 boards have copper lands and traces on the boards.
There is a document called IPC-TP-1044 which outlines an oven bake process
followed by a microetch process using Enplate PC-499, cascading water
rinses, and other materials (18 steps in all !). This microetch process is
followed by Omegameter 600SMD process and then followed by board drying in a
nitrogen autoclave. The boards were then placed in Kapak bags which were
"tested" to be non-contaminating.
I have the following questions:
- Why do the boards have copper traces ? Why aren't they tin-lead ready for
soldering ?
- Is there a simpler way to get these boards clean in preparation for
soldering ?
Thanks,
Bill Kasprzak, Moog Inc., 716-652-2000 ext 2507
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|