Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset=us-ascii |
References: |
<Macintosh */PRMD=MOT/ADMD=MOT/C=US/@MHS> |
Date: |
Tue, 24 Sep 1996 08:03:58 +0000 |
Precedence: |
list |
Resent-From: |
|
From [log in to unmask] Wed Sep 25 08: |
34:04 1996 |
Content-Transfer-Encoding: |
7bit |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
Old-Return-Path: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v5W47-00005BC; Tue, 24 Sep 96 06:54 CDT |
Resent-Message-ID: |
<"yB5Vq1.0.BtG.clyHo"@ipc> |
Subject: |
|
From: |
|
Cc: |
|
Resent-Sender: |
|
X-Mailer: |
Mozilla 2.01 (Macintosh; I; 68K) |
Message-Id: |
|
Parts/Attachments: |
|
|
Blind/Buried vias: IPC-RB-276 calls for a minimum of .5 mil, as you stated, so I
would say that is the norm. For many in-house designs, we allow the 0.5 min for via
pairs (vias from layers 1 to layers 2), but require the full 1 mil for other Buried
vias, such as a via from layers 2 thru 13 on a 14 layer board.
Bab-Hui Lee-CTUA065 wrote:
>
> Hello all ye experts out there:
>
> Is there an IPC specs that calls for certain minimum copper thickness in the
> blind & buried vias? Is 0.5 mil the norm, or more is required??
>
> _____________________________________________________________________________
> __
> To: [log in to unmask]@INTERNET
> From: [log in to unmask]@INTERNET on Wed, Sep 18, 1996 12:54 PM
> Subject: Re: Users/designer of buried via product
>
> Jenni,
> It is not my experiance or expertise on buried vias (as a designer) you
> should look for, rather the experiance and expertise of your PWB
> manufacturer. Buried via technology has been around for quite some time and
> most Board Houses offering this technology are quite comfotable and
> proficient with it. If you bare board test you should be able to guarantee
> acceptable yields ( I have my board house do this testing to assure I only
> buy usable boards).
> As a designer I always attempt to stay away from this technology as it cost
> considerably more to fabricate and does not usually seem to "buy" me that
> much in added real estate.
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|