Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v386k-0000S2C; Tue, 17 Sep 96 16:55 CDT |
From [log in to unmask] Wed Sep 18 08: |
52:42 1996 |
Old-Return-Path: |
|
Date: |
Tue, 17 Sep 96 14:56:53 PST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"lVPnI1.0.g7E.uunFo"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
The reading which u are getting are pretty normal... for a 7 mil stencil
thickness....values would be ranging from 5 to 8 mils.....if u need to get
precise values around 7mils....try and play around with stencil to pcb
release time...this could make a lot of difference...
Mohit Gujral
Solectron Corp
ph 408 957 2757
______________________________ Reply Separator _________________________________
From: Brent Vanlandingham <[log in to unmask]>
To: [log in to unmask]
Subject: Assy: Solder Paste Height
I am trying to determine the solder paste height based on stencil
thickness. I have noticed that with a 7mil stencil I am getting
approximately 8mils of paste height using a metal squeegee blade
regardless of pressure settings. Is this typical of the screen printing
process??
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|