TECHNET Archives

1996

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Content-Type:
text/plain; charset="us-ascii"
Old-Return-Path:
Date:
Fri, 13 Sep 1996 11:43:46 -0400
Precedence:
list
Resent-From:
Resent-Sender:
TechNet-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/6210
X-Sender:
TO:
Return-Path:
<TechNet-request>
X-Loop:
Resent-Message-ID:
<"jBvTT.0.XLE.biNEo"@ipc>
Subject:
From:
Jim Moritz <[log in to unmask]>
Received:
by ipc.org (Smail3.1.28.1 #2) id m0v1a0F-0000OuC; Fri, 13 Sep 96 10:17 CDT
From [log in to unmask] Fri Sep 13 10:
38:21 1996
X-Mailer:
Windows Eudora Light Version 1.5.2
Message-Id:
Parts/Attachments:
text/plain (24 lines)
We are looking for help to save some 4 layer boards that have a slight but
unacceptable warp. The
warp occured when the books were taken apart too soon after lamination.  We
looked at the construction and the layout and ruled them out as to
contributing to the problem.

They did not have a proper cool down cycle. 

Does anyone know of a way to get rid of the warpage?

These parts are 12" x 9" x .062"

Thanks again,
Jim Moritz

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************



ATOM RSS1 RSS2