Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v1YlH-0000OuC; Fri, 13 Sep 96 08:58 CDT |
Old-Return-Path: |
|
Date: |
Fri, 13 Sep 96 08:33:54 PST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"VKFqS.0.nA9.2YMEo"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Fri Sep 13 10: |
37:02 1996 |
X-Loop: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Hitachi has a very good machine that was on display at JPCA.
Hitachi America, Ltd.
Osamu (Sam) Sekine
Division Manager
(408) 747-0777
You may also want to revisit your post etch punch equipment, which is
probably Multi-line. Qualitek in Minneapolis is building state of the
art equipment for CRAY, Merix, Bureau of Engraving and Johnson Mathey.
Improving your inner layer registration may eliminate the need to
"post lam" xray.
Scott Baller
Engineering Manager
MULTEK (Roseville, MN)
______________________________ Reply Separator _________________________________
Subject: compensation machine
Author: [log in to unmask] at INTERNET_GATEWAY
Date: 9/12/96 9:53 PM
Hi,
Does anyone know of a machine that is able to measure inner layer
expansion/shrinkage immediately after multilayer lamination ? Something like
a machine that uses x-rays to locate the positions of fiducials at known
coordinates on the panels and then generates the x/y shift with respect to
nominal. Any information is appreciated.
Derris Chew
Motorola PCB Operations
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|