 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| Old-Return-Path: |
|
| Date: |
Wed, 11 Sep 96 10:37 WET DST |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| X-Sender: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Loop: |
|
| Resent-Message-ID: |
<"QRNTY.0.0OA.ioiDo"@ipc> |
| Subject: |
|
| From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v0qHn-0000QaC; Wed, 11 Sep 96 09:29 CDT |
| From [log in to unmask] Fri Sep 13 09: |
51:02 1996 |
| X-Mailer: |
Windows Eudora Version 1.4.4 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
I would like to konw if anyone out there has done a design using 1206 style
packages and has run four traces underneath the part. By shrinking the
standard pad in our default CAD libraries to 52 x 64 I can get four 8 mil
lines underneath the package. It works out to 10 mil spacing with 8 mil
lines. Anyone out there have problems with doing something like this?
Thanks in advance.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
