Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uygoL-0000PMC; Thu, 5 Sep 96 10:57 CDT |
Content-Type: |
text/plain; charset=us-ascii |
CC: |
|
References: |
|
Date: |
Thu, 05 Sep 1996 10:07:41 -0700 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
From [log in to unmask] Thu Sep 5 14: |
23:21 1996 |
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
Content-Transfer-Encoding: |
7bit |
Resent-Message-ID: |
<"tOR6j1.0.vO4.tXlBo"@ipc> |
Subject: |
|
From: |
|
Old-Return-Path: |
|
X-Mailer: |
Mozilla 2.01KIT (Win16; U) |
Organization: |
RAMP Inc |
Message-ID: |
|
Parts/Attachments: |
|
|
[log in to unmask] wrote:
>
> Questions from a telecomms designer:
>
> What is the max continuous operating temperature for a COMPONENT on a vertically
> orientated PCB (without thermal management) without causing "damage" to the
> substrate?
>
> Has anyone derived a time/temp situation in reflow that would result in
> significant degregation of the PCB such that personnel might be affected by
> toxic fumes?
>
> Thanks, George Wheadon
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To unsubscribe from this list at any time, send a message to: *
> * [log in to unmask] with <subject: unsubscribe> and no text. *
> ***************************************************************************
The MAX. Component temperature is dependent upon the component
specification and should be available from the supplier specs.
A typical FR4 PCB is capable of continuously operating at 60-70 deg. C in
a product. All applications should be designed to stay well below Tg
temperature of the board material in use.
The PCB can withstand the reflow temperature, 200 - 240 deg. C for a
short duration which is the reflow cycle of 1.5-2.5 minute. If fumes are
comming off the FR4 PCB, the temperature is too hot and the epoxy will be
breaking down and will cause reliability issues in the field.
--
Pratap Singh
Tel./Fax: 512-255-6820
e-mail: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|