Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Fri, 23 Aug 1996 17:53:16 -0500 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
From [log in to unmask] Mon Aug 26 10: |
38:26 1996 |
Subject: |
|
From: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uu5DV-0000MeC; Fri, 23 Aug 96 18:00 CDT |
Cc: |
|
Resent-Message-ID: |
<"sgXRr.0.Pq6.OWZ7o"@ipc> |
Message-Id: |
<v02130500ae43d2b5884f@[157.175.110.24]> |
Parts/Attachments: |
|
|
Justino Garavito said:
> Design and Development Team in need of a New and/or used Pick & Place
> machine.
If you want a recommendation, I might be able to help, but don't understand
some of your criteria...
> 2) Components should be distributed on carousels.
Do you mean a turret head mechanism for the nozzles which place the parts?
> 3) Must have staging platform for large quad flat pack components.
Do you want to pick directly from matrix trays?
> 4) Self sufficient internal vacuum supply.
Most machines are designed to develop vacuum from compressed air supply. If
you have about 5 CFM of 85 psi air, you won't need vacuum, but almost any
machine on the market will require air.
> 6) Height of pointing mechanism, preferably Laser,
> 1 1/2" board clearance, mechanical and video systems will be
> considered.
This is atypical, topside clearance is usually more like 6-12 mm, and
bottom 20-25 mm considering the fixed transport underneath and the moving
head mount above the boards
> 3) Microscope.
If you mean video output from the component camera, this is pretty common,
Otherwise please explain.
regards
Jerry Cupples - [log in to unmask]
Interphase Corporation
13800 Senlac Dr.
Dallas TX 75234
(214) 654-5150
(214) 654-5500 FAX
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|