 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0utxFx-0000N9C; Fri, 23 Aug 96 09:30 CDT |
| Content-Type: |
TEXT/PLAIN; CHARSET=US-ASCII |
| Old-Return-Path: |
|
| Date: |
Fri, 23 Aug 1996 07:38:01 -0700 |
| Precedence: |
list |
| Reply-To: |
|
| cc: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| Priority: |
Normal |
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| From [log in to unmask] Fri Aug 23 10: |
06:41 1996 |
| X-Loop: |
|
| Resent-Message-ID: |
<"6TZaL1.0.kKI.G2S7o"@ipc> |
| Subject: |
|
| From: |
|
| X-Mailing-List: |
|
| Resent-From: |
|
| Resent-Sender: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
John:Go with the stainless steel tank and be done with it.
Coreseal has a tendency to get holes poked in it.
The last KMnO4 tank we used lasted over 10 years of
daily use.Tank construction was 304-L SS,I would
recommend a titanium heater.
On Thu, 22 Aug 1996 08:57:27 -0700 John Gully wrote:
> From: John Gully <[log in to unmask]>
> Date: Thu, 22 Aug 1996 08:57:27 -0700
> Subject: FAB: Tank Liners (CoreSeal)
> To: [log in to unmask]
>
> Address,
>
> We currently use Polypropylene (PP) for a majority of our chemical
> solution tanks and are having excellent success and for many years.
> We are currently using a double PP liner for our Permaganate Tank and
> would like to change this temporary set-up. Stainless Steel is not
> out of the question, but not desired now. However we are considering
> a material called CoreSeal. From what I understand this is a
> plastic/rubber coating that tightly seals tanks, floors, frames etc.
>
> Does anyone have pros and cons on this material or similar products
> used as liners for solution tanks? Thank you.
>
> John Gulley
>
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To unsubscribe from this list at any time, send a message to: *
> * [log in to unmask] with <subject: unsubscribe> and no text. *
> ***************************************************************************
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
