Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uswca-0000RMC; Tue, 20 Aug 96 14:37 CDT |
Encoding: |
12 TEXT |
Old-Return-Path: |
|
Date: |
Tue, 20 Aug 96 14:52:00 CDT |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"VX0Q1.0.dPE.EGX6o"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
From [log in to unmask] Thu Aug 22 06: |
05:23 1996 |
X-Mailer: |
Microsoft Mail V3.0 |
Message-Id: |
|
Parts/Attachments: |
|
|
What is the smallest acceptable plated through hole diameter in a .063"
thick FR4 board without running into barrel-cracking problems?
Our suppliers are saying that a .010" drill dia. is acceptable for vias, but
this exceeds the 3 to 4 aspect ratio (hole diameter to board thickness) that
many books specify. Are our books out of date?
Thanks in advance
Jack Tippit
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|