Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uoVKY-0000ExC; Thu, 8 Aug 96 08:40 CDT |
Content-Type: |
text/plain; charset=us-ascii |
Old-Return-Path: |
|
Date: |
Thu, 08 Aug 96 09:50:21 -0300 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
Resent-Message-ID: |
<"jn8PE2.0.MUL.bvU2o"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
From [log in to unmask] Thu Aug 8 12: |
54:20 1996 |
Content-Transfer-Encoding: |
7bit |
Message-Id: |
|
Parts/Attachments: |
|
|
Hi
I am looking for pre clean information on drum side treated foil. It has been recommended to preclean prior to resist lamination, with a 16 to 20% sulfuric acid followed by nothing but water rinsing. Is this acceptable to remove the cromate coating and will it etch acceptable through alkaline etch?
Does anyone recommend a better one step preclean for this materail?
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|