Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0ulbIr-0000RVC; Wed, 31 Jul 96 08:27 CDT |
Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
Old-Return-Path: |
<buetmi> |
Date: |
Wed, 31 Jul 1996 08:27:05 -0500 (CDT) |
Precedence: |
list |
Resent-From: |
|
cc: |
|
MIME-Version: |
1.0 |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
Resent-Message-ID: |
<"B_Ngj3.0.XwL.iyr_n"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Wed Jul 31 17: |
25:18 1996 |
In-Reply-To: |
|
Message-ID: |
<Pine.3.89.9607310813.C55993-0100000@ipc> |
Resent-Sender: |
|
Parts/Attachments: |
|
|
IPC-A-49 contains a test protocol for surface mount lead shear/pull.
Because the test is contained in a round robin report (as opposed to a
standard) I don't know that it can be considered an industry standard,
but I suspect it is valid nonetheless.
Send me a private e-mail with your Fax no. and I will be happy to send it
to you.
Mike Buetow
IPC Technical Staff
2215 Sanders Road
Northbrook, IL 60062
P: 847-509-9700, ext. 335
F: 847-509-9798
[log in to unmask]
On Wed, 31 Jul 1996 [log in to unmask] wrote:
>
> I am a university student who is looking to ascertain the strength
> of SMT solder joints. I would like to know if there are any standard
> industry practices which are used to measure the force required to
> pull an SMT solder joint apart. I am mostly interested in solder
> joints involving J-type and gull-wing leads. Any information would be
> appreciated.
>
> Thank You,
>
> Valquirio N. Carvalho
>
> [log in to unmask]
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To unsubscribe from this list at any time, send a message to: *
> * [log in to unmask] with <subject: unsubscribe> and no text. *
> ***************************************************************************
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|