 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0ulaYp-0000NOC; Wed, 31 Jul 96 07:39 CDT |
| Old-Return-Path: |
|
| Date: |
Wed, 31 Jul 1996 08:49:22 -0400 |
| Precedence: |
list |
| Resent-From: |
|
| Message-ID: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Resent-Message-ID: |
<"_G-RU3.0.XE1.5Gr_n"@ipc> |
| Subject: |
|
| From: |
|
| From [log in to unmask] Wed Jul 31 17: |
24:57 1996 |
| X-Loop: |
|
| Resent-Sender: |
|
| Parts/Attachments: |
|
|
Dave,
If you did get the X-outs, you could use those boards for other purposes,
such as process development, residue characterization, baking / solderability
tests, etc. Many companies benefit from having a few extra boards around to
play with, especially when it comes time to troubleshoot a new process. You
might also keep some of the X-outs on file as a representative of that
particular lot or shipment.
Doug Pauls
CSL
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
