Ah ! ! ! Yes ! ! ! the ol' ...CLEAN 5 ... FILTER 2 ....CRITIC
routine, but it still takes the finesse of the a fine- tuned puck hand
to ...BUMP ...SLIDE ...PUSH ...SHOVE or whatever the infamous commands
on your particular CAD Tool is ...to balance out the aesthetic and
manufacturabilty of the design. My "WISH" is that the CAD Tool would do
want I want it to do ..instead of what I do with it. I have often , in
the dead of night , held a copy of IPC-D-275 to the screen of my system in
the hopes of 'absorption by osmosis' of some better DesignRule guidlines
...but long gone are the times when you had all the pinouts of every DIP
device in the TTL books memorized and all you needed was a sharper pencil to
get that one addition line in there. Now we answer not only to the E.E.'s
, but also the M.E.'s , the MFG. E.'s , the ICT E.'s (test) , the Assy
E.'s , "The Fabricators" , Purchasing and sometimes it seem like even the
cafeteria personnel and maintenance are getting their 2cents in on our
designs. I feel that CAD Designers have become far more 'Multi-Tasking'
than alot of the CAD Software that is out there. Our task has become to
make it work despite all of the limitations written into the
software.....along with becoming a part-time LAN -- SuperUser -- ROOT -less
(no root privileges) HardWare expert.
WOW !
DaveSchlice
Motorola GSTG
Scottsdale Arrid-zona
----------
>From: TechNet-request
>To: technet
>Subject: Design comments
>Date: Friday, 26 July, 1996 6:20PM
>
>Ralph Hersey wrote:
>>That is why in the IPC's-D-275 it is "suggested/recommended" that the
>designer
>>minimize the areas of "close/minimal" conductor spacings and spread the
>>conductors out when ever possible. Because, IMO, the majority of us are
>stuck
>>with CAD systems with an IQ that is barely measurable, the automated
design
>>systems route to minimum in an x or y orientation and most systems do not
>>"automatically" spreadout closely spaced conductors, when possible, on a
>>routine basis. Instead, most CAD designers/operators must manually edit
the
>>conductive patterns --- labor intensive and time consuming, and it's
seldom
>>done in today's fast-lane paced work environment. [Comment -- oh!
>>Ralllllphoooo - are you going to stimulate comments from the CAD community
>>with those comments].
>>
>Well hereeeeeeeeees the comments. Even Designers have bosses. If that boss
>wants it now instead of right, all we can do is warn him. We are a Service
>Bureau and we have plenty of bosses. They all want it yesterday, and they
>want it correct also. They don't want to have to pay for elec. test or ICT.
>"We are paying for the product why should we have to pay you to make sure
>you make it correct?" We try to educate but most times it feels like a
>loosing battle.
>Good tools do help though. The CCT router has a spread feature, and also
>many DFM rules to guide it, it can really help.
>
>Regards
>Fred Pescitelli
>Phoenix Designs
>1285 Turner Rd.
>Lilburn, GA 30247
>[log in to unmask]
>770-923-3465
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To unsubscribe from this list at any time, send a message to: *
>* [log in to unmask] with <subject: unsubscribe> and no text. *
>***************************************************************************
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|