 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0ti0DC-00004BC; Thu, 1 Feb 96 08:42 CST |
| Old-Return-Path: |
|
| Date: |
Thu, 01 Feb 96 06:49:09 PST |
| Precedence: |
list |
| X-Loop: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| From [log in to unmask] Thu Feb 1 09: |
33:26 1996 |
| TO: |
|
| Return-Path: |
|
| Resent-Message-ID: |
<"63Skl3.0.sd5.15D4n"@ipc> |
| Subject: |
|
| From: |
|
| Resent-From: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
please, divulge some details.
______________________________ Reply Separator _________________________________
Subject: Re: REQ: Info on Entek Plus/NC Flux
Author: [log in to unmask] at corp
Date: 1/31/96 7:58 PM
I worked for a flex manufacture that was trying to get Entek approved. It's
almost imposible with flex. I don't recommend it. Be sure your spec. is
clear about ridgid only.
|
|
|
