 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0ufpMr-0000EZC; Mon, 15 Jul 96 10:15 CDT |
| Old-Return-Path: |
|
| Date: |
Mon, 15 Jul 1996 10:22:42 -0600 |
| MIME-version: |
1.0 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Loop: |
|
| Resent-Message-ID: |
<"E942l2.0.TMK.A2cwn"@ipc> |
| From [log in to unmask] Tue Jul 16 08: |
46:27 1996 |
| Content-type: |
text/plain; CHARSET=US-ASCII |
| Subject: |
|
| Message-id: |
|
| Content-transfer-encoding: |
7BIT |
| Content-disposition: |
inline |
| X-Mailer: |
Novell GroupWise 4.1 |
| From: |
|
| Parts/Attachments: |
|
|
IPC-TM-650 Method 2.4.36 Rework Simulation, Plated Through Hole calls
for unsoldering and resoldering a wire in a plated through hole 5 tiimes
using a 60 w. soldering iron set at 450 to 500 deg. F. This soldering iron
temperature requirement seems very low to me and doesn't fit actual
practice in industry. Is there something I'm missing? Does anyone know
why the temperature is required to be at 450 to 500 F?
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
