Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uYdyI-0000CdC; Tue, 25 Jun 96 14:40 CDT |
Old-Return-Path: |
|
From [log in to unmask] Tue Jun 25 17: |
27:30 1996 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"u2wfz1.0.nSJ.W24qn"@ipc> |
Subject: |
|
From: |
|
Date: |
Tue, 25 Jun 1996 15:49:04 -0400 |
Cc: |
|
X-Mailer: |
Novell GroupWise 4.1 |
Message-Id: |
|
Parts/Attachments: |
|
|
A little more info - we have an 8 amp circuit which is going through two
15 mil vias with 1 ounce copper on the wall thickness. The board is
0.062" FR-4 with 2 oz. copper. Is this enough?
Thanks,
Steve
>>> Doug McKean <[log in to unmask]> 06/25/96
03:25pm >>>
Steve Murphy wrote:
> > Is there an IPC spec, or otherwise, that provides some guideline on
the
> current capacity of vias on PCBs, based on hole size, wall thickness,
> etc? Any thoughts are appreciated.
> > Steve Murphy
> TRW Automotive
Steve,
How much current is there in this design?
Doug
|
|
|