Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uR9Kx-0000CSC; Tue, 4 Jun 96 22:32 CDT |
Old-Return-Path: |
|
Date: |
Tue, 4 Jun 1996 20:39:04 -0700 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"xIpH1.0.ZEH.U_Fjn"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Wed Jun 5 17: |
25:51 1996 |
X-Loop: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Dave and Rudy,
It is important to remember that brown oxide by virtue of it's shorter
and much more densely packed crystal strucure has a much greater
surface area than black oxide. Thisprovides the pepreg with many more
bonding sites with which to grab on to thus improving the bond
strengths.
Also I have performed a number of test on the composition of brown and
black oxide coatings. I found that black oxide contains a much greater
proportion of thermally unstable cuprous oxide than does the brown.
During the lamination cycle, the cuprous oxide can decompose forming
oxygen, thus contributing to delamination.
Good luck
|
|
|