Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Tue, 4 Jun 1996 14:17:36 +0800 (SST) |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"QD3Bf1.0.P_9.5Ezin"@ipc> |
Subject: |
|
From: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uQpKn-0000CMC; Tue, 4 Jun 96 01:11 CDT |
From [log in to unmask] Wed Jun 5 17: |
16:58 1996 |
X-Mailer: |
Windows Eudora Version 1.4.4 |
Message-Id: |
|
Parts/Attachments: |
|
|
Dear Technet,
I am having big interpretation problem on the FAB drawing:-
Customer's Requirement :-
__________
| | preprag 0.6 mm
----------
__________
| | C.L.L 0.4mm
----------
__________
| | preprag 0.6 mm
----------
It stated on the drawing as:
a. Thickness of copper foil is 35u
b. Thickness of PCB thickness is 1.5/1.6 mm
We end up getting an overall thickness of 1.7 to 1.77mm from our PCB supplier.
The PCB supplier come back with their side of the story,
Supplier's interpretation is
---------- -----
| | 35 u ^
--------- |
|
|-------| |
| | 70 u |
|-------| |
| | overall thickness = 1.81 mm
| | |
|-------| |
| | 70 u |
|-------| |
|
--------- |
| | 35 u v
--------- -----
I would like to know whether the PCB supplier is right ?, and whar is the
correct way
to interpret the drawing.
and also does anyone know of any spec/book that tell one how to interpret a FAB
drawing ..
I'm appreaciate for any comment given .. Thanks.
|
|
|