Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uMHeC-0000FmC; Wed, 22 May 96 12:24 CDT |
Encoding: |
39 Text |
Old-Return-Path: |
|
Date: |
Wed, 22 May 96 12:29:17 cst |
Precedence: |
list |
Resent-From: |
|
Cc: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"AnPYq1.0.2XI.Ftqen"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Tue Jun 4 17: |
59:35 1996 |
X-Loop: |
|
Resent-Sender: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Good morning Jack!
I have several articles in my references that describe both
acceptable use and disastrous use of tin/lead pins in gold sockets. I
think the key word you used is "potential". In the right environment
(moisture - not necessarily water) you will have problems because of
the galvanic effect of tin on gold. If things stay dry then you may
have no problems. For a battery to form you need two dissimilar metals
and an electrolyte - take away one of the three and you avoid
problems. Look at your environment and see if moisture would be a
concern. Also look at the ASM Metals Handbook Vol. 13 Corrosion for
additional information.
Dave Hillman
Rockwell Collins
[log in to unmask]
______________________________ Reply Separator _________________________________
Subject: assy:compatability gold vs tin/lead
Author: [log in to unmask] at ccmgw1
Date: 5/22/96 11:11 AM
We have instances where tin/lead coated pins are inserted into gold plated
sockets, etc. Components even have gold/tin-lead or gold/tin interfaces,
such as an IC socket with a gold contact with a tin sleeve. Mil-Std-889B
indicates gold as being incompatable with tin or tin/lead. Has anyone
looked into this issue and is there a potential for corrosion formation and
associated problems? Again, I just refereing to mechanical contact ( not
soldering ).
Thanks,
Jack Tippit
Wilcox Electric
[log in to unmask]
|
|
|