Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uLyzK-0000CrC; Tue, 21 May 96 16:29 CDT |
Old-Return-Path: |
|
Date: |
21 May 1996 14:32:47 -0700 |
Precedence: |
list |
Resent-From: |
|
Message-ID: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"Vg4np1.0.enI.WMZen"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Tue Jun 4 17: |
54:27 1996 |
X-Loop: |
|
X-Mailer: |
Mail*Link SMTP-QM 3.0.2 |
Resent-Sender: |
|
Parts/Attachments: |
|
|
Mail*Link(r) SMTP FWD>DES: Specs for VME conduction cooling
wedgelocks
Gary --
The VMEbus Spec handbook we have in our area is too old (1987) and doesn't
address the wedgelocks in the hardware chapter.
The address on the handbook refers to:
VMEbus International Trade Association
10229 N. Scottsdale Rd., Suite E
Scottsdale, AZ 85253
Hope this is of some help,
Ralph Hersey
e-#004#mail: [log in to unmask]
--------------------------------------
Date: 5/21/96 2:05 PM
From: Gary Peterson
Can anyone point me to a drawing for the thermal path wedgelocks that are
used on conduction cooled VME boards? They must be part of the card
cage assembly. I'm told there is a VME spec. that describes the
whole assy.
Thanks in advance,
---
Gary D. Peterson
_/_/_/ _/ _/ _/ SANDIA NATIONAL LABORATORIES _/_/_/
_/ _/_/ _/ _/ P.O. Box 5800, M/S 0503 _/_/
_/_/_/ _/ _/ _/ _/ Albuquerque, NM 87185-0503 _/_/_/_/_/_/
_/ _/ _/_/ _/ Phone: (505)844-6980 _/ _/_/ _/
_/_/_/ _/ _/ _/_/_/_/ FAX: (505)844-2925 _/ _/_/ _/
E-Mail: [log in to unmask] _/_/_/
------------------ RFC822 Header Follows ------------------
Received: by quickmail.llnl.gov with SMTP;21 May 1996 14:03:36 -0700
Received: from ipc.org by simon.ipc.org via SMTP (940816.SGI.8.6.9/940406.SGI)
id QAA27960; Tue, 21 May 1996 16:02:12 -0700
Resent-Date: Tue, 21 May 1996 16:02:12 -0700
Received: by ipc.org (Smail3.1.28.1 #2)
id m0uLxqi-0000EYC; Tue, 21 May 96 15:16 CDT
Resent-Sender: [log in to unmask]
Old-Return-Path: <[log in to unmask]>
Date: Tue, 21 May 96 14:22:41 MDT
From: [log in to unmask] (Gary Peterson)
Message-Id: <[log in to unmask]>
To: [log in to unmask]
Subject: DES: Specs for VME conduction cooling wedgelocks
Resent-Message-ID: <"ENg7J1.0.GyJ.-HYen"@ipc>
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/4256
X-Loop: [log in to unmask]
Precedence: list
Resent-Sender: [log in to unmask]
|
|
|