Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uHc4F-0000WeC; Thu, 9 May 96 15:12 CDT |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Thu, 9 May 1996 15:18:21 -0500 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"2aZnj2.0.25F.M6ban"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Wed May 15 19: |
21:28 1996 |
Mime-Version: |
1.0 |
X-Mailer: |
Windows Eudora Pro Version 2.1.2 |
Message-Id: |
|
Parts/Attachments: |
|
|
Hello out there.
We are looking into the handling of our humidity sensitive parts.
We currently keep them in their sealed bags, and reseal unused parts
immediately after a build(we build very low volumes of boards per day). We
are considering controlling the environment in the room where we build, and
keeping the humidity under 30% to eliminate any moisture build up in the
parts. Do I run into other problems, such as ESD issues, and how can I deal
with those? Are there health concerns from running in too dry an
environment? Any comments would be appreciated.
Thanks.
Steve Quinn
Heurikon Corp
|
|
|