Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uHVaj-0000DMC; Thu, 9 May 96 08:17 CDT |
Encoding: |
32 Text |
Old-Return-Path: |
|
Date: |
Thu, 09 May 96 09:19:22 CST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<DesignerCouncil-request> |
Resent-Message-ID: |
<"sYwlH2.0.iFC.O1Van"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Message-Id: |
|
From [log in to unmask] Wed May 15 18: |
52:37 1996 |
Parts/Attachments: |
|
|
I used the wrong word!
I apologize MICROSRIP is the correct word.
NOT stripline.
I am doing Microstrip calculations on a Microstrip construction
Sorry about that.
Here's some specifics:
Dielectric Constant = 4.5
Dielectric Height = 0.029 inches
Trace Width = 0.008 inches
Trace Thickness = 0.0024 inches
Trace Length = 1.00 inch
Inductance per inch (assumed value) = 20 nH per inch
Calculated Impedance Value for Trace = 107 ohms
Derived Capacitance from Impedance = 2pF per inch
Signal Delay along trace = 187 psec
Resonant Frequency of trace without a load = 850 MHz
Doug McKean
|
|
|