DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Content-Type:
text/plain; charset=US-ASCII
Old-Return-Path:
<[log in to unmask]>
Date:
Mon, 1 Apr 96 9:52:11 EST
Precedence:
list
Resent-From:
[log in to unmask]
Resent-Sender:
DesignerCouncil-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/1523
Content-Length:
281
TO:
<[log in to unmask]>
Return-Path:
<DesignerCouncil-request>
X-Loop:
[log in to unmask]
Resent-Message-ID:
<"ligZn.0.0hD.A--Nn"@ipc>
From [log in to unmask] Wed Apr 3 16:
46:42 1996
From:
"Gary S Thomas" <[log in to unmask]>
Received:
by ipc.org (Smail3.1.28.1 #2) id m0u3l5m-00008iC; Mon, 1 Apr 96 09:00 CST
Subject:
re: DES: Axial Leaded Spacing
X-Priority:
3 (Normal)
Message-Id:
<[log in to unmask]>
Parts/Attachments:
text/plain (21 lines) 
Mark:

In the good old days when we could actually see the parts, we used the 
following for lead bend centers.

L = B + 3D + FA

where

B = Max Body Length

D = Nominal lead diameter

FA = Fabrication Allowance = .070

then,  L is rounded to the next highest .100 inch.

Gary ...

ATOM RSS1 RSS2