 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wtHER-000BkpC; Tue, 29 Jul 97 13:42 CDT |
| Subject: |
|
| TO: |
|
| Old-Return-Path: |
|
| Date: |
Tue, 29 Jul 1997 11:31 -0800 |
| X-Loop: |
|
| Precedence: |
list |
| From [log in to unmask] Thu Jul 31 11: |
53:43 1997 |
| Resent-From: |
|
| Resent-Message-ID: |
<"3wfos3.0.z0H.gcZtp"@ipc> |
| Resent-Sender: |
|
| From: |
|
| Message-ID: |
|
| X-Mailing-List: |
|
| >From bergdi Tue Jul 29 13: |
43:02 1997 |
| Return-Path: |
<DesignerCouncil-request> |
| Parts/Attachments: |
|
|
I will be laying out some single sided boards in the near future. I haven't
actually done this before. I would like to ask anyone what information needs
to be supplied to the FAB and Assembly vendor? Specifically, what are the
Notes for the FAB/ASSY DWGs. What do I have to supply to the vendor for the
jumper layer? Gerber file, Jumper list? I'm sure I will have more questions,
but let start from here.
Thanks much in advance,
Scott Shepard
***************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
