Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wWi2H-000BisC; Wed, 28 May 97 07:41 CDT |
From [log in to unmask] Wed May 28 08: |
19:05 1997 |
CC: |
|
Old-Return-Path: |
|
Date: |
Wed, 28 May 1997 08:59:23 -0700 |
Precedence: |
list |
Reply-To: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
X-Mailing-List: |
|
>From dammth Wed May 28 07: |
41:13 1997 |
TO: |
|
Return-Path: |
<DesignerCouncil-request> |
X-Loop: |
|
Resent-From: |
|
Content-Type: |
text/plain; charset=us-ascii |
Content-Transfer-Encoding: |
7bit |
Resent-Message-ID: |
<"5VF972.0.5UC.SV2Zp"@ipc> |
Subject: |
|
From: |
|
References: |
|
X-Mailer: |
Mozilla 3.0 (Win16; I) |
Organization: |
GN Nettest, Datacom Division, Broadband/Public Network Group (BNG) |
Message-ID: |
|
Parts/Attachments: |
|
|
Mitch Morey wrote:
>
> Help.
>
> How do I call out 1/2oz Copper per MIL-P-13949? I know it's C1/C1 for 1oz
> over 1 oz. What's 1/2?
>
> Thanks,
>
> Mitch Morey
Mitch,
this is how we specify our copper:
------------------------------------------------------
Laminate shall be in accordance with MIL-S-13949/H.
Copper weight is 1 oz./sq. ft. internal and 1/2 oz./sq. ft.
external. Final composite thickness will be .062" +/- .004".
Typical material specification, as per ANSI/IPC-D-275,
is Type GFN-0620-CH/CH-B1B where:
GFN = FR4 glass fabric impregnated with flame retardant epoxy resin
0620 = nominal dielectric base thickness (ten-thousandths of an inch)
CH = top side, metallic foil type and nominal weight (ounce/sq. ft.)
CH = bottom side, metallic foil type and nominal weight (ounce/sq.ft.)
B = laminate quality (pits and dents per sq. in.)
1 = thickness tolerance
B = laminate material bow and twist
------------------------------------------------------
I hope this helps.
Ciao!
Eric Bonatti
PCB Design
GN Nettest, Datacom division
[log in to unmask]
<< UBI MAJOR, MINOR CESSAT >>
***************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|