 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wFMS2-000BmEC; Thu, 10 Apr 97 11:11 CDT |
| Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
| From [log in to unmask] Fri Apr 11 11: |
23:35 1997 |
| Date: |
Thu, 10 Apr 1997 09:21:38 -0700 (PDT) |
| Precedence: |
list |
| Resent-From: |
|
| cc: |
|
| MIME-Version: |
1.0 |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<DesignerCouncil-request> |
| X-Loop: |
|
| Resent-Message-ID: |
<"01X4l3.0.407.95HJp"@ipc> |
| Subject: |
|
| From: |
|
| Old-Return-Path: |
|
| In-Reply-To: |
|
| Message-ID: |
<Pine.3.89.9704100910.A23391-0100000@netcom12> |
| Resent-Sender: |
|
| Parts/Attachments: |
|
|
I'm using PADs Perform (Windows). Also own PowerPCB, but have stuck
with the old one. The new one is huge (the executable is 9M), and
there are some things I don't like, like having to constantly diddle
with the filter to be able to select what I want. On the plus side,
it does use a true Windows interface if you like that sort of thing,
and the copper pour and design rules are more sophisticated. There's
a wealth of addins too for $$$, for advanced rule checking etc.
Eventually I'll have to leave the old one behind probably, especially
one the new Logic (schematic entry comes out).
Stew Benedict
CAD Specialist
GE Lighting, Nela Park
***************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
