 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wFLYw-000BkIC; Thu, 10 Apr 97 10:14 CDT |
| Message-ID: |
|
| TO: |
|
| Old-Return-Path: |
|
| Date: |
Thu, 10 Apr 1997 11:24:47 -0400 (EDT) |
| X-Loop: |
|
| Precedence: |
list |
| Resent-From: |
|
| Subject: |
|
| Resent-Message-ID: |
<"RyWGY3.0.h2E.nFGJp"@ipc> |
| Resent-Sender: |
|
| From: |
|
| cc: |
|
| X-Mailing-List: |
|
| From [log in to unmask] Fri Apr 11 11: |
21:18 1997 |
| Return-Path: |
<DesignerCouncil-request> |
| Parts/Attachments: |
|
|
Doug,
My advice is not product specific, if that helps. The first thing I suggest
is to determine what design types & complexity you need the layout package to
do. Next, arrange with a vendor to personally "try out" their software to see
how well or poorly it does with your sample design. Be sure to test the
various outputs you require, like Gerber 274X (highly recommended) and DXF to
AutoCAD, etc. Factoring in price and support, depending on your budget, you
should have all you need to make your choice. Good Luck.
Gary
***************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
