Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0w30Ct-000BBpC; Fri, 7 Mar 97 08:01 CST |
Old-Return-Path: |
<simon.ipc.org!uu7.psi.com!shadow!cadsp3!teltrend.com!elucik> |
Date: |
Fri, 7 Mar 97 08:10:50 CST |
From [log in to unmask] Fri Mar 7 09: |
52:31 1997 |
Precedence: |
list |
X-Loop: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<DesignerCouncil-request> |
Resent-Message-ID: |
<"Zz2nv1.0.ReD.c-18p"@ipc> |
Subject: |
|
From: |
|
Resent-From: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
To all PCB Design Conqueror's,
I have a situation arising in our manufacturing facility. We are finally graduating
to bottom side SMT design. I am butting heads with the IE (Industrial Eng.) Dept. on
how close we can place via's to bottom side pads for caps and resistor's. Currently
we have a horizontal flow with vertical placement of parts running through the wave.
I started routing boards with a clearance of .015" in any given direction from the
bottom side pads. My IE Dept. wants a minimum of .025" in any direction, without having
any source to base this on. Does anyone have a standard that they use or is there a
spec that states how far from a bottom side pad a via should be?
Thanks.
Eric Lucik
[log in to unmask]
***************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|