Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vGmgW-0000S9C; Fri, 25 Oct 96 08:52 CDT |
Content-Type: |
text/plain; charset=US-ASCII |
Old-Return-Path: |
|
Date: |
Fri, 25 Oct 1996 08:32:15 -0400 |
Precedence: |
list |
Resent-From: |
|
From [log in to unmask] Mon Oct 28 08: |
58:49 1996 |
Message-ID: |
|
Content-Transfer-Encoding: |
7bit |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<DesignerCouncil-request> |
X-Status: |
|
Content-Description: |
cc:Mail note part |
Subject: |
|
From: |
|
X-Loop: |
|
Mime-Version: |
1.0 |
Resent-Message-ID: |
<"P7HFi2.0.wC7.MOCSo"@ipc> |
Resent-Sender: |
|
Parts/Attachments: |
|
|
DOUG:
IPC-SM-782 IS THE BEST WAY TO GO. ALSO THE SMT COMPONENT AND LAND
PATTERN BOOK IS ANOTHER GOOD REFERENCE. THIS CAN BE PURCHASED THROUGH
THE SMTA (SURFACE MOUNT TECHNOLOGY ASSOCIATION) 612-920-7682.
REMEMBER, THE BEST WAY TO GO IS IPC-SM-782, JEDEC, THEN OTHERS.
GOOD LUCK;
______________________________ Reply Separator _________________________________
Subject: Surface Mount Land Patterns
Author: [log in to unmask] at Internet2
Date: 10/24/96 10:42 AM
Hello Designers,
We are getting presser for our assembly house to switch our smt land
patterns especially the capacitor and resistor to the ipc-sm-782 rev
A. I wondering the good, bad, and ugly of using these land patterns ?
Thank you,
Doug McDaniel
Exabyte Corp.
Boulder, CO
[log in to unmask]
****************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
****************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
****************************************************************************
****************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
****************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
****************************************************************************
|
|
|