DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0v7ggR-0000QfC; Mon, 30 Sep 96 06:38 CDT
Old-Return-Path:
<[log in to unmask]>
Date:
Mon, 30 Sep 96 13:23:11 CST
Precedence:
list
Resent-From:
[log in to unmask]
Resent-Sender:
DesignerCouncil-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/2108
TO:
[log in to unmask], [log in to unmask]
Return-Path:
<DesignerCouncil-request>
Resent-Message-ID:
<"wGfk9.0.znF.55xJo"@ipc>
Subject:
DES: Tooling Holes tolerances.
From:
"Juan Sebastian Pantoja Conde" <[log in to unmask]>
From [log in to unmask] Mon Sep 30 11:
10:33 1996
X-Loop:
[log in to unmask]
Message-Id:
<[log in to unmask]>
Parts/Attachments:
text/plain (15 lines) 
Do any know witch is the tolerance for a tooling hole (for PCB/fixture
alignment)?
+0.003/-0.000in or +0.002/-0.001in.

Thanks

****************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05      *
**************************************************************************** 
* To unsubscribe from this list at any time, send a message to:            *
* [log in to unmask] with <subject: unsubscribe> and no text. *
****************************************************************************

ATOM RSS1 RSS2