 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0tmjEu-00008qC; Wed, 14 Feb 96 09:35 CST |
| Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
| Old-Return-Path: |
<bergdi> |
| Date: |
Wed, 14 Feb 1996 09:35:21 -0600 (CST) |
| Precedence: |
list |
| Resent-From: |
|
| cc: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
|
| From [log in to unmask] Wed Feb 14 11: |
59:14 1996 |
| Resent-Message-ID: |
<"r3FXp1.0.AgA.-4W8n"@ipc> |
| Subject: |
|
| From: |
|
| X-Status: |
|
| Resent-Sender: |
|
| X-Loop: |
|
| Message-ID: |
<Pine.3.89.9602140944.A68469-0100000@ipc> |
| Parts/Attachments: |
|
|
The following question is one that was provided by designers for
the basic level exam. It is NOT included in the final published
test and is for reference only. The topic is Transforming a
Schematic or logic Diagram.
*************************************************************
124 What are the characteristics of a connector with a type
reference designator?
A. fixed
B. movable
C. male pinned
D. female pinned
select the most correct answer
********************************************************
Previous QOD
123 If analog circuits are restricted to the center of the
board, what is the effect of placing a power supply in
the connector zone, below the analog circuits?
B. the heat from the power supply causes instability
Resource: IPC-T-50 Specific Terms; IPC-D-275 para 3.5.5, 3.5.6,
3.6; figure 3-11.
*********************************************************
Please send comments, constructive critique, or suggestions to Lisa
Williams at [log in to unmask]
Dieter Bergman
|
|
|
