 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| Old-Return-Path: |
|
| Date: |
Thu, 02 May 1996 11:53:34 |
| Precedence: |
list |
| From [log in to unmask] Thu May 2 13: |
58:52 1996 |
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<DesignerCouncil-request> |
| X-Loop: |
|
| Resent-Message-ID: |
<"8RSmI1.0.MQI.IWEYn"@ipc> |
| Subject: |
|
| From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uF1bI-00009CC; Thu, 2 May 96 11:51 CDT |
| Resent-From: |
|
| X-Mailer: |
GNNmessenger 1.2 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
Hi to all!
This is a great place to get excellent information. I need some
info ASAP. I'm working on a board that is going to be manufactured
over-seas and can't get this information from that manufacturer. I
have some good guidelines for auto-inserting axial components and
DIPs, but I need to know the spacing requirements for radial
components (caps, transistors, 1/4W & 2W resistors that are stood
up). Can anyone help me out?
This board also has to meet UL approval per UL/CSA/CE/VDE for
250VAC. I am using 100mil trace widths with 100mil air gaps
minimum, sound good to you?
Hope you don't mind all my questions. More than that, I hope you
don't mind answering all my questions because I'm sure I'll be
asking alot more. That's what we're here for, right?
Thank You again!
Kitty
|
|
|
