Does anybody have any experience with L-configuration  (Multiline) 
         tooling  on  outer  circuit  and  PISM  printing. We are currently 
         considering this system but would be interested to know whether it 
         improves  registration  significantly  (both  circuit to drill and 
         PISM to circuit).
         
         Alternatively, is anyone aware of any printers  or  upgrades  that 
         allow alignment to drilled reference targets on a volume basis (ie 
         fully or semi-automatic). We currently have an ORC 6626 which  has 
         cameras  and  an  alignment system, but this has to be carried out 
         manually for each panel (low throughput) and is  also  limited  in 
         size.
         
         We  are also aware of a Tamarak unit, but this only aligns the two 
         artworks together prior to printing a batch.
         
         Any information in these areas would be appreciated.
         
         
         Tim Tatton
         Development Engineer
         Design to Distribution (D2D).
         Kidsgrove
         Stoke-on-Trent
         UK
         
         Tel:      44 1782 771000
         Fax:      44 1782 787259
         E-mail:   [log in to unmask]