Received: |
by ipchq.com (Smail3.1.28.1 #2)
id m0sLAaN-0000GnC; Mon, 12 Jun 95 09:35 CDT |
Old-Return-Path: |
<miso!post.AES.COM!gainesw> |
Date: |
Mon, 12 Jun 95 07:18:03 PDT |
Precedence: |
list |
X-Loop: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
|
Resent-Message-ID: |
<"IFVlS2.0.A28.e25tl"@ipc> |
Subject: |
|
From: |
|
Resent-From: |
|
From [log in to unmask] Sat Apr 27 14: |
18:28 1996 |
Message-Id: |
|
Parts/Attachments: |
|
|
Jim Mc Neal asked when "tented" vias are required with LPI soldremask.
Here (Aerojet) our application is space / vacume environment.
_When_ we require a soldermask (smt parts bonded to pwb _with_
vias under the part) we will tent the via. on all other applications
our designs are pads-only (so we don't need _any_ soldermask)
We tent so that we don't entrap air (or contaminants) in the pwb.
HTH,
Bill Gaines
AeroJet (for $) 1100 Hollyvale, Azusa, Calif. 91702-0298
IEPS (for info) [log in to unmask]
IHPVA (for speed & fun) P.O. Box 51255, IN, IN 46251-0255
SCCA (for trophys) Solo II (818-988-RACE)
|
|
|