 
| Received: |
by ipchq.com (Smail3.1.28.1 #2)
id m0sqqKy-0000GmC; Thu, 7 Sep 95 18:26 CDT |
| Old-Return-Path: |
<miso!mcimail.com!AndrewPM_+a_Rogers-M_+lAndrew_P_Magee+r%ROGERS_CORPORATION> |
| Date: |
Thu, 7 Sep 95 18:09 EST |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| X-MB-Info: |
v1.10G | mci6es5er05 |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
|
| Resent-Message-ID: |
<"W1LMo3.0.qT7.R-tJm"@ipc> |
| Subject: |
|
| From: |
|
| Status: |
O |
| X-Loop: |
|
| From [log in to unmask] Sat Apr 27 14: |
44:15 1996 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
We have a customer with this capability.
Lenthor Engineering
1506 Gladding Court
Milpitas, CA 95035
Tel: (408) 945-8787
Fax: (408) 945-0347
Contact: Jerry Smith
There are quite a few mil-spec shops that could do this for you.
Andrew P. Magee - Applications Engineer
Rogers - Circuit Materials Unit
Tel: (602) 917-5237
Fax: (602) 917-5256
E-Mail: 7403202@mcimail
______________________________ Reply Separator _________________________________
Subject: Rigid Flex Referral
Author: StephenJ (Steve Joy) {NAME:Steve
Joy|EMS:INTERNET|MBX:[log in to unmask] at MCIMAIL
Date: 9/7/95 1:21 PM
I am looking for a shop that is capable of building a rigid flex with the
following criteria: 10 layers/L4-5 flex; .003/.003" on the flex;
005/.005" on the epoxy; ~2000 holes- mostly .0135"; about 9" X 14" with
3 flex legs off the main board.
Thanks,
Steve Joy
|
|
|
