 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0tRghZ-0000MJC; Mon, 18 Dec 95 08:38 CST |
| Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
| Old-Return-Path: |
<bergda> |
| Date: |
Mon, 18 Dec 1995 08:37:58 -0600 (CST) |
| Precedence: |
list |
| Resent-From: |
|
| cc: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| X-Mailing-List: |
|
| From [log in to unmask] Sat Apr 27 15: |
31:02 1996 |
| TO: |
|
| Return-Path: |
|
| X-Status: |
|
| Resent-Message-ID: |
<"Cp3u73.0.V5C.BpNrm"@ipc> |
| Subject: |
|
| From: |
|
| Resent-Sender: |
|
| In-Reply-To: |
|
| X-Loop: |
|
| Message-ID: |
<Pine.3.89.9512180833.G76846-0100000@ipc> |
| Parts/Attachments: |
|
|
The document you are searching for is a joint IPC/EIA standard
designated - ANSI-J-STD-002 Solderability Tests for Component Leads,
Terminations, Lugs, Terminals, and Wires the cost is $15 to IPC members
and $30 to non members. You can order directly from IPC. Our order
department is on extension 318.
Regards
dave
***************************************************
David W. Bergman, Technical Director
IPC
2215 Sanders Road
Northbrook, IL 60062-6135
708-509-9700 x340 Phone
708-509-9798 Fax
email [log in to unmask]
***************************************************
On Fri, 15 Dec 1995 [log in to unmask] wrote:
> Hi there -
>
> I have been searching for either a copy of IPC or EIA industrial standard
> on solderability of component lead, and so far have not found one.. Does
> anybody know if there is such a standard available ?
>
> Since the quality of solder joint depends on both the solderability of
> substrate (board) and component lead, and since there is industrial
> standard such as IPC-RB-276 and IPC-SM-840 addressing the solderability of
> the board, it makes me believe there must be an industrial standard
> regarding to lead solderability exist somewhere.
>
> Thanks in advance for your assistance.
>
>
> Nora Xiao
> Process Engineer
> Tektronix, Inc.
> [log in to unmask]
> (503)627-3160
>
>
|
|
|
