Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset=US-ASCII |
Old-Return-Path: |
<miso!jna.com.au!dominicb> |
Date: |
Tue, 14 Nov 1995 11:50:31 +1100 (EST) |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
Content-Transfer-Encoding: |
7bit |
Status: |
O |
X-Mailing-List: |
|
From [log in to unmask] Sat Apr 27 15: |
17:26 1996 |
Content-Length: |
1256 |
TO: |
|
Return-Path: |
|
X-Status: |
|
Resent-Message-ID: |
<"JfoHE1.0.wzG.SHHgm"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0tFTaw-0000epC; Tue, 14 Nov 95 16:12 CST |
X-Mailer: |
ELM [version 2.4 PL24 ME5a] |
Message-Id: |
|
Parts/Attachments: |
|
|
Hi all,
I'm giving a talk on PCB design (cause thats what I do) at my local radio club
(Amateur Radio, that is). Every month, someone gives a talk on some topic they
know something about.
As preparation for this, I got the blokes (they are mostly blokes) to write
down a few questions about what they'd like answered in the talk. Of course,
the sort of questions are mainly to do with constructing more than designing.
I was wondering if you could help me with a few of them.
1. What chemicals are used for electroless plating ( so I can make my own
plated through holes at home )?
2. Why use cross-hatch power planes?
3. What are the failure rates on making PCBs? (I want to give them the rough %
comparison for 2layer vs 4layer vs 6layer & 12thou vs 8thou vs 5thou etc).
4. How much current can you put through a millimetre wide track? ( I was going
to use Fig 5.2 & 5.3 from COOMBS Printed Circuit Handbook 3rd Ed. but I was
told recently that these were inaccurate. Any comments )
Any comments by Tuesday afternoon (US time) would be appreciated.
--
Dominic Bragge, PCB Designer
JNA Telecommunications (R&D) "Acoustic"
16 Smith St Used to hit Billiard Balls!
Chatswood NSW AUSTRALIA 2067
|
|
|